How to set the Date and Time on your 300m Diver
How to set the Time
Unscrew the crown in a counter clock wise position until you feel the crown pop out.
Pull the Crown to the 2nd (furthest) position.
Turn the crown in either a clockwise or counter clockwise position until the desired time is achieved.
Push the crown back in and turn in a clockwise position until fully screwed down. Do not over tighten.
How to set the Date
As a general rule to follow, always set the date with the time set at 6:30. This is for 2 reasons.
-
Neither 6:30am, nor 6:30pm lands between the “danger zone” of 9pm – 3am. So no matter if your watch is currently on AM or PM time, 6:30 will always avoid this danger zone.
-
You can position your watch hands to 6:30 with both the hour and minute hand pointing straight down to the 6:00 position. This is generally pretty easy to remember.
Once you’ve successfully set the time to 6:30, you can proceed to adjust the day and date functions.
Setting the Date
Unscrew the crown using instructions above
Pull the crown out 1 position
Turn the crown in a counter clockwise position until you achieve the date you desire
Push the crown back in and turn in a clockwise position until fully screwed down. Do not over tighten.
|
|
